Shelly Qubino Wave Plug UK
£48.39
A Z-Wave smart plug for UK Type G sockets that adds remote control and power monitoring to any plugged-in appliance, handling resistive loads up to 3000W (13A). Power consumption is shown via the colour of its LED ring, and it runs on the latest low-power Z-Wave 800 series.
- Handles resistive loads up to 3000W at 13A
- LED ring colour indicates live power consumption
- UK Type G plug and socket, plug-and-play install
- Built-in over-temperature, over-voltage and over-current protection
Buy the Shelly Qubino Wave Plug UK online in the UK from ShellyUK — genuine Shelly stock with fast UK delivery.
Wave Plug UK is a smart plug that enables automation and remote control of any connected electrical appliance at home while also monitoring its power consumption.
- Manage power supplies of up to 3000 W (resistive) at 13A
- Plug & Play installation (compatible with standard Type G sockets and plugs)
- Measures power consumption of the connected appliance, indicated by the colour of the LED ring.
- Low power consumption: < 0.7W
- Z-Wave frequency band: 868.42 MHz (CEPT countries)
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Over-the-air firmware updates
- Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
Handles resistive loads up to 3000W at 13A
LED ring colour indicates live power consumption
UK Type G plug and socket, plug-and-play install
Built-in over-temperature, over-voltage and over-current protection
Where you'd use it
At-a-glance appliance energy use
Plug in a tumble dryer or kettle and read approximate consumption straight off the LED ring colour without opening the app.
Overnight standby cut-off
Schedule the plug to cut power to a TV and games console setup overnight, eliminating standby draw that would otherwise run all night.
Single-protocol Z-Wave scenes
Add socket-level control to an existing Z-Wave mesh alongside other Wave relays in the house, keeping the whole install on one protocol.
Specification
Connectivity
- CPU Z-Wave S800
- Z-Wave™ repeater
- Yes
- Z-Wave frequency band
- 868.4 MHz
- Maximum radio frequency power transmitted in frequency bend < 25mW
Physical & Build
- (H x W x L)
- 60 x 60 x 56 ±0.5 mm
Environmental
- Humidity
- 30% to 70% RH
Power & Electrical
- Power supply
- AC 230V ±10% , 50/60Hz
- Power supply
- DC N/A
- Electrical consumption < 0.7W
- Max switching voltage
- 260V
- Over-voltage sensor
- Yes
Other
- Max switching current
- 13A resistive load
- Over-temperature sensor
- Yes
- Over-current sensor
- Yes
- Energy monitoring
- Yes
- Ambient temperature
- -20°C to 40°C / -5°F to 105°F
- Z-Wavw range (depending on local construction) up to
- 40m indoors (131ft.)
Reviews
There are no reviews yet.