Shelly Qubino Wave Pro 2PM
£110.49
A two-channel, DIN-rail mountable Z-Wave relay rated 16A per channel, 25A total, with power metering on each channel and combined, built for professional lighting and appliance automation. Uses the Z-Wave 800 Series with Security 2 authentication and needs a certified gateway to set up.
- 2 channels, 16A each, 25A device total
- Metering per channel and combined together
- Z-Wave 800 Series, Security 2 authenticated
- Voltage, current and overheating protection built into both channels.
Buy the Shelly Qubino Wave Pro 2PM online in the UK from ShellyUK — genuine Shelly stock with fast UK delivery.
Wave Pro 2PM is a single-phase, 2-channel relay supporting up to a combined 25A for professional lights and appliance automation in residential or commercial applications. Equipped with an integrated power meter, Wave Pro 2PM allows you to measure the power consumption of all automated lights or heavier appliances. Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs. The Wave Pro 2PM is suitable for home and facility automation with remote control, is DIN-rail mountable inside a breaker box, and includes advanced safety features.
-
- 2 outputs, 16A each. Total device maximum of 25A
- Power metering on each channel separately and together
- Single-phase control
- DIN-rail mountable
- Extremely low power consumption: < 0.3W
- Z-Wave frequency band: 868.4 MHz (CEPT countries)
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Over-the-air firmware updates
- Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
2 channels, 16A each, 25A device total
Metering per channel and combined together
Z-Wave 800 Series, Security 2 authenticated
Voltage, current and overheating protection built into both channels.
Where you'd use it
Two-Zone Breaker Box Switching
Install the Wave Pro 2PM in the consumer unit to control two separate lighting or appliance circuits, with a combined capacity of 25A for heavier commercial loads.
Per-Circuit Cost Tracking
Use the per-channel and combined power metering to see how much each of the two circuits is costing to run, useful for splitting costs across tenants or departments.
Retrofit-Free Professional Install
Because it's DIN-rail mounted and repeats the Z-Wave signal, it suits a professional install where no visible smart devices are wanted and the mesh needs extending anyway.
Specification
Connectivity
- Z-Wave™ frequency bands
- 868,4 MHz; 865,2 MHz; 869,0 MHz; 921,4 MHz; 908,4 MHz; 916 MHz; 919,8 MHz; 922,5 MHz; 919,7-921,7-923,7 MHz; 868,1 MHz; 920,9 MHz
- CPU Z-Wave™ S800
- Z-Wave™ repeater
- Yes
- Maximum radio frequency power transmitted in frequency band(s) < 25mW
- Operational range (depending on local construction) Up to
- 40m indoors (131 ft.)
Protection & Safety
- Voltage protection / Cutoff
- Yes
- Current protection / Cutoff
- Yes
- Max power protection / Cutoff
- Yes
- Overheating protection
- Yes
Physical & Build
- (H x W x L)
- 94 x 19 x 69 ±0.5 mm 3.70 x 0.75 x 2.71 ±0.02 in
Environmental
- Humidity
- 30% to 70% RH
Power & Electrical
- Power supply
- 110-240V ±10% 50/60Hz AC
- Max switching voltage
- AC 240V
- Max switching voltage
- DC N/A
- Power consumption < 0.3W
Smart Features
- Power measurement
- Yes
Other
- Max switching current
- AC 16A per channel, 25A total
- Max switching current
- DC N/A
- Clean contact relay
- No
- Ambient temperature
- -20°C to 40°C / -5°F to 105°F
Reviews
There are no reviews yet.