Shelly Qubino Wave i4 DC
£34.29
The Shelly Qubino Wave i4 DC is an input-only device (no relays) with four inputs for reading wall switches and triggering Z-Wave scenes or actions. Each button supports short, long, and double presses, and it can trigger up to 8 actions via direct device associations without needing a gateway, or up to 12 through one.
- Input reader only, contains no relays
- 4 inputs, 3 actions per button (short/long/double)
- Up to 8 actions via direct associations, no gateway
- Powered by 5-24V DC supply, no AC needed
Buy the Shelly Qubino Wave i4 DC online in the UK from ShellyUK — genuine Shelly stock with fast UK delivery.
Wave i4 DC allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button. Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 DC can show the status and control the action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.
Multi-actions support: With a simple push of a button, you can activate up to 12 scenes or actions from other Z-Wave devices in your network. Wave i4 DC supports up to 3 different automation actions per button (short, long, and double presses), which makes it extremely convenient for quick manual control over a group of devices.
Trigger up to 8 actions without a gateway: Wave i4 DC allows you to establish direct communication between your Z-Wave devices and set various associations without requiring a hub!* By supporting 2 associations per button, Wave i4 DC enables you to trigger and execute up to 8 actions and thus seamlessly control multiple Z-Wave devices with a simple press of a button.
- Wave i4 DC is an input reader device (it does not contain relays).
- Manually control other Z-Wave devices (e.g. with a multi-button switch)
- Multi-click – activation of up to 12 actions
- Extremely low power consumption: < 0.3W
- Latest technology: Z-Wave 800 Series
- Z-Wave frequency band: 868.4 MHz (CEPT countries)
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Supports over-the-air firmware updates (OTA)
- Works with Z-Wave certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
Input reader only, contains no relays
4 inputs, 3 actions per button (short/long/double)
Up to 8 actions via direct associations, no gateway
Powered by 5-24V DC supply, no AC needed
Where you'd use it
Existing Switch Retrofit
Wire it behind a multi-button wall switch to keep the physical switch working while it reports button presses into Home Assistant, since it's an input reader rather than a relay.
Hub-Free Device Association
Set up direct associations to other Z-Wave devices so a button press can control them even without a Z-Wave hub present.
Multi-Press Scene Panel
Assign short, long, and double presses across all four inputs to select from up to twelve different scenes or actions from a single wall plate.
Specification
Connectivity
- CPU Z-Wave™ S800
- Z-Wave™ repeater
- Yes
- Z-Wave™ frequency bands
- 868,4 MHz; 865,2 MHz; 869,0 MHz; 921,4 MHz; 908,4 MHz; 916 MHz; 919,8 MHz; 922,5 MHz; 919,7-921,7-923,7 MHz; 868,1 MHz; 920,9 MHz
- Maximum radio frequency power transmitted in frequency band(s) < 25mW
- Operational range (depending on local construction) Up to
- 40m indoors (131 ft.)
Physical & Build
- (H x W x L)
- 42 x 37 x 16 ±0.5 mm
- Conductor cross section
- 0.5 to 1.5 mm? / 20 to 16 AWG
- Conductor stripped length
- 5 to 6 mm / 0.20 to 0.24 in
Environmental
- Humidity
- 30% to 70% RH
Power & Electrical
- Power supply
- DC 5-24V DC
- Power supply
- AC N/A
- Power consumption < 0.3W
Other
- Ambient temperature
- -20°C to 40°C / -5°F to 105°F
- Number of inputs
- 4
- Works without a neutral connection
- No
- Screw terminals max. torque
- 0.4 Nm / 3.5 lbin
Reviews
There are no reviews yet.