The Shelly BLU H&T ZB Ivory is a compact temperature and humidity sensor with dual Bluetooth and Zigbee connectivity, rated IP54 for dust and splash resistance. That makes it suitable for bathrooms, basements and outdoor use as well as ordinary rooms. It runs on a single CR2032 battery for up to 3 years.
Dual Bluetooth and Zigbee connectivity
IP54-rated for dust and splash resistance
Up to 3 years battery life from one CR2032
Secure, AES-encrypted communication for reliable data
The Shelly 3EM-63 Gen3 is a compact energy meter that can monitor a three-phase supply or three independent single-phase circuits using contactless integrated current transformers rated to 63A. It measures to IEC 62053-21 Class B accuracy, stores 7 days of 1-minute interval data on-device, and works standalone on Wi-Fi or via MQTT, HTTP and WebSocket.
Monitors three-phase or three independent single-phase circuits
Contactless metering via integrated current transformers, rated 63A
Stores 7 days of 1-minute interval data locally
Compact design slips directly over breaker outputs
The Shelly Wave Dimmer is a Z-Wave dimmer that works with or without a neutral wire and handles up to 200W of dimmable lighting. Built on Z-Wave 800 series technology, it supports both standard Z-Wave mesh and Z-Wave Long Range (over 1km line of sight), acts as a mesh repeater, and reports voltage, current, power and energy.
Supports Z-Wave Long Range (over 1km line of sight)
Works with or without a neutral wire
Acts as a Z-Wave mesh repeater for other devices
Over-current, over-voltage and overheating protection built in
The Shelly BLU Button1 is a battery-powered Bluetooth button for triggering scenes and devices without reaching for your phone, supporting up to 4 separate actions via single, double, triple and long presses. It uses the open BTHome protocol for direct Home Assistant compatibility and runs on a CR2032 battery for up to 2 years.
Up to 4 configurable click actions per button
BTHome protocol for direct Home Assistant compatibility
CR2032 battery rated for up to 2 years
Beacon mode helps you locate the button when needed
The Shelly 1PM Mini Gen4 pairs the compact retrofit relay format of the 1 Mini with real-time power metering, switching up to 8A at 240V AC. It supports Wi-Fi, Bluetooth, Zigbee and Matter (including Apple HomeKit), and stores energy usage data to the free Shelly cloud for analysis over time.
Real-time power metering with free cloud data storage
Multiprotocol: Wi-Fi, Bluetooth, Zigbee and Matter (HomeKit)
Switches up to 8A at 240V AC
Built-in voltage, current and overpower protection cutoffs
The Shelly Pro 3EM – 3CT63 is a DIN-rail three-phase energy meter supplied with a purpose-built bank of three 63A current transformers, rated to IEC 62053-21 Class B accuracy. It stores 60 days of 1-minute interval data, tracks imported and exported energy for solar setups, and communicates over LAN, Wi-Fi, Bluetooth, Modbus and MQTT. No built-in relay.
Supplied with a bank of three 63A current transformers
Class B accuracy (IEC 62053-21), 1% measurement precision
Communicates via LAN, Wi-Fi, Bluetooth, Modbus and MQTT
Photovoltaic-ready, tracking both imported and exported energy
The Shelly 1 Mini Gen4 is a compact retrofit relay small enough to fit behind a wall switch or socket, switching up to 8A at 240V AC or 5A at 30V DC. It offers Wi-Fi, Bluetooth, Zigbee and Matter connectivity (including Apple HomeKit), and can be wired for dry, potential-free contacts where isolated switching is needed.
Dry, potential-free contact option for isolated switching
Multiprotocol: Wi-Fi, Bluetooth, Zigbee and Matter (HomeKit)
The Shelly Pro Dimmer 1PM is a DIN-rail mounted, single-channel dimmer designed to sit inside the breaker box rather than behind a switch. It handles dimmable LED, halogen and ferromagnetic transformer loads up to 200W on 110-240V supplies, supports both leading and trailing edge dimming, and includes built-in power monitoring and device temperature protection.
DIN-rail mounted for installation inside the breaker box
Supports both leading and trailing edge dimming
Handles LED, halogen and ferromagnetic transformer loads up to 200W
Includes device temperature protection for safe operation
This 50A current clamp is the sensor for the Shelly Pro EM and Shelly EM Gen3, rated for a 50A primary current with 1% accuracy. It uses a ferrite core design and is intended specifically for these two Shelly meters rather than the original Shelly EM.
Rated for 50A primary current, 1% accuracy
Ferrite core clamp design
Compatible with Shelly Pro EM and Shelly EM Gen3 only
10mm internal core diameter for standard cable runs
The Shelly Pro 3EM – 400A is a DIN-rail three-phase energy meter for professional installations, supplied with 3 x 400A current transformers. It measures voltage, current, power and power factor per phase to IEC 62053-21 Class B accuracy, stores 60 days of 1-minute data, and tracks imported and exported energy for solar setups. No built-in relay.
Supplied with 3 x 400A current transformers
Class B accuracy (IEC 62053-21) with 1% precision
Stores 60 days of 1-minute interval data on-device
Photovoltaic-ready, tracking both imported and exported energy
The Shelly Pro LoRa Add-on gives compatible Shelly Pro devices long-range LoRa communication over distances of up to 5km, useful on large sites where Wi-Fi and Ethernet don't reach. It draws power directly from the host device, uses an external SMA antenna, and needs at least two LoRa-equipped units to transmit and receive.
Long-range LoRa communication up to 5 km
External SMA antenna connector for extended coverage
Requires two LoRa-equipped devices to transmit and receive
Built-in AES-CCM encrypted communication for security
The Shelly 4-Channel Decoupler 230V lets existing 230V wall switches trigger up to four low-voltage DC inputs on compatible Shelly devices, using optocouplers to electrically isolate the AC and DC sides. It's designed for retrofitting traditional switches onto devices like the Plus RGBW PM, Pro RGBWW PM, Plus Uni and Plus Add-On.
Four independent AC-to-DC input channels
Optocoupler isolation keeps AC and DC circuits separate
Compatible with Plus RGBW PM, Pro RGBWW PM, Plus Uni, Plus Add-On
Works with buttons, relays, sensors and specialist controllers
The Shelly Dimmer Gen3 is a single-channel trailing-edge dimmer that fits behind an existing switch and works with or without a neutral wire (a bypass is needed under 20W). Built on Shelly's 8MB ESP-Shelly-C3 chip, it supports scripting, KNXnet/IP and doubles as a Wi-Fi range extender and Bluetooth gateway.
Works without a neutral wire (bypass needed under 20W)
Supports KNXnet/IP for building automation integration
Doubles as Wi-Fi range extender and Bluetooth gateway
The Shelly Qubino Wave PM Mini is a Z-Wave power meter only — it has no relay — designed to retrofit into tight electrical boxes for pure energy monitoring. Built on Z-Wave 800 series with Security 2 authentication and SmartStart pairing, it works with any Z-Wave certified gateway and reports consumption up to 16A at 240V.
Power metering only, no relay included
Z-Wave 800 series with Security 2 authentication
SmartStart automatic setup with certified Z-Wave gateways
The Shelly Plus RGBW PM is a compact controller for 12V or 24V DC LED strips, supporting RGBW, RGB and white light profiles. It measures power draw in real time, lets you dim colour and white channels independently, and includes night mode and over-current protection for safer long-term use on LED runs.
Independent dimming control for RGB and white channels
The Shelly Pill is a USB-C powered Gen3 sensor hub that bridges third-party sensors and low-voltage devices into your smart home. Out of the box it reads DS18B20 and DHT22 temperature/humidity sensors, and add-ons extend it to analogue voltage and digital I/O monitoring, while also acting as a Bluetooth gateway for Shelly BLU devices.
Plug-and-play support for DS18B20 and DHT22 sensors
Doubles as a Bluetooth gateway for Shelly BLU devices
Expandable via add-ons for analogue voltage and digital I/O
Powered via USB-C (5V) for simple, low-power installation
