Shelly Pro 1PM is a DIN-rail mounted single-channel relay designed for installation inside the consumer unit, with power monitoring and Wi-Fi, Ethernet and Bluetooth connectivity. Built for professional home and commercial automation, it adds temperature, overpower and overvoltage protection for safer remote control of loads.
DIN-rail mountable inside the breaker box
Handles up to 16A load with power measurement
Wi-Fi, Ethernet (LAN) and Bluetooth all built in
Built-in overload and device temperature protection
Shelly 1PM Mini Gen3 is a compact single-channel relay for automating lights or small appliances, with power monitoring built in. Small enough to fit behind an existing wall switch or socket, it's designed for retrofit installs without a hub, controlled via the Shelly app, voice assistants, or automation platforms.
Switches up to 8A at 240V AC (2000W)
Just 29 x 35 x 16mm, fits behind switches or sockets
Real-time power metering with free cloud data storage
Built-in voltage, current and overpower protection cutoffs
The Shelly Dimmer Gen4 is a compact trailing-edge dimmer that fits behind existing switches and works with or without a neutral wire (a bypass is needed under 20W). It supports Wi-Fi, Bluetooth, Zigbee and Matter, handles up to 200W of dimmable LED, halogen or incandescent lighting, and includes automatic calibration for flicker-free dimming.
Multiprotocol: Wi-Fi, Bluetooth, Zigbee and Matter
Works without a neutral wire (bypass needed under 20W)
Automatic calibration for smooth, flicker-free dimming
Adjustable fade rate and transition time for tailored dimming
The Shelly BLU Motion is a battery-powered PIR sensor that reports motion instantly over Bluetooth using the BTHome protocol, with a built-in light sensor for brightness-based automations. It runs up to 5 years on a single CR2477 battery and needs a gateway — a Shelly BLU Gateway or any mains-powered Plus, Pro or Gen3 device — to reach the Shelly app.
PIR motion detection with adjustable sensitivity
Built-in LUX sensor for brightness-based automations
Requires a gateway device (BLU Gateway or Plus/Pro/Gen3)
The Shelly 2PM Gen4 is a dual-channel relay that can run two independent loads or one set of motorised blinds or shutters with slat-angle control. It supports Wi-Fi, Zigbee, Bluetooth and Matter (including Apple HomeKit), and reports real-time power metering on each channel, with up to 10A per channel and 16A combined.
Multiprotocol: Wi-Fi, Zigbee, Bluetooth and Matter (HomeKit)
Independent power metering on each of the two channels
Cover control with position and slat angle adjustment
Also works as a WiFi/Zigbee extender and Bluetooth gateway
The Shelly Plus Plug UK is a 13A smart plug built on the ESP32 chip, giving you remote on/off control plus status via built-in LED indicators. It runs standalone or as part of a wider automation setup, with an embedded web server for local configuration and scripting for custom routines. Not for inductive loads.
Handles loads up to 13A resistive
Built-in embedded web server for local configuration
Not compatible with inductive loads (manufacturer note)
Built-in LED indicators show power status at a glance
The Shelly Button Add-on is a surface-mounted enclosure that houses a compatible Shelly relay or dimmer, letting you add smart control to lights or fans without opening walls or fitting a new back box. It comes with pre-installed, colour-coded wiring and works with a wide range of Shelly Gen1, Plus, Gen3, Gen4, and Mini devices.
Houses a Shelly relay or dimmer, sold separately
Pre-installed, colour-coded wiring included
Compatible with Gen1 through Gen4 and Mini devices
This is a Shelly EM energy meter bundled with two 120A current clamps, for individually monitoring the consumption of appliances, circuits, or a whole home including solar generation. It's a Wi-Fi energy meter with contactor control functionality, storing 365 days of built-in energy history, in the larger-clamp configuration for higher-current circuits.
Two channels metering up to 120A each
Built-in contactor control for load switching
365 days of built-in energy history
Includes overpower shutdown and consumption limit features
The Shelly Qubino Wave Pro 2 is a 2-phase, 2-channel Z-Wave relay for professional lighting and appliance automation, with two potential-free (dry contact) outputs offering flexible voltage support. It's DIN-rail mountable inside a breaker box, handles up to 16A per channel and 25A combined, and includes advanced safety features.
The Shelly Dimmer 0/1-10V PM Gen3 is a smart dimming controller for driving 0-10V and 1-10V compatible LED drivers from a phone, tablet, PC, or automation system. It's a current-sourcing controller that works standalone over Wi-Fi or through cloud services, with built-in power measurement and support for up to 13A of switching current.
Supports both 0-10V and 1-10V driver types
Current-sourcing controller with power measurement
Handles up to 13A switching current
Supports HTTP/HTTPS webhooks and custom mJS scripts
The Shelly Qubino Wave Pro Shutter controls motorised blinds, roller shutters, and awnings, and can link to a weather API to automatically extend or retract awnings based on forecasts. It's Security 2 Authenticated, acts as a Z-Wave signal repeater with up to 40m range, and includes built-in overheating and overpower protection.
Weather API integration for automated awnings
Acts as a Z-Wave repeater, up to 40m
Handles up to 16A switching current per channel
Security 2 Authenticated for high-level network protection
The Shelly Qubino Wave Shutter is a Z-Wave controller for automating bi-directional AC motors such as roller shutters, blinds, awnings, and pool covers, including tilt control of Venetian blind slats. It works with push-button or toggle switches, includes power metering, and runs on the Z-Wave 800 series chipset with SmartStart pairing.
Tilt control for Venetian blind slats
Supports push-button and toggle switches
Up to 10A switching current per channel
Built-in power metering monitors motor consumption
The Shelly Pro Dual Shutter PM is a DIN-rail smart controller for two independently metered roller shutters, blinds, or awnings, each supporting up to 16A of load. It's built for breaker-box installation with temperature, overpower, and overvoltage protection, and supports scripting for custom automations such as weather-triggered closing.
Two channels, up to 16A per cover
Separate power metering for each cover
DIN-rail mount with overvoltage/overpower protection
Includes Ethernet connectivity alongside Wi-Fi and Bluetooth
The Shelly H&T Gen3 is a battery-powered temperature and humidity sensor with a low-power e-paper display and built-in clock, designed for wall or surface mounting. It needs no separate hub, connecting over Wi-Fi and MQTT, and runs for around a year on 4 x AA batteries, with USB-C available for faster setup.
The Shelly Qubino Wave i4 DC is an input-only device (no relays) with four inputs for reading wall switches and triggering Z-Wave scenes or actions. Each button supports short, long, and double presses, and it can trigger up to 8 actions via direct device associations without needing a gateway, or up to 12 through one.
Input reader only, contains no relays
4 inputs, 3 actions per button (short/long/double)
Up to 8 actions via direct associations, no gateway
This is a 3-pack of Shelly BLU TRV smart thermostatic radiator valves, sold with a Shelly BLU Gateway Gen3 that adds Wi-Fi connectivity to each valve's Bluetooth and Zigbee links. Each valve adjusts hot water flow through a radiator to hit a set temperature, controllable via the rotary encoder, app, or a weekly schedule, on 2 x AA batteries.
Includes 3 valves plus a BLU Gateway Gen3
Bluetooth and Zigbee connectivity, Wi-Fi via gateway
Weekly schedule with manual rotary encoder override
