Shelly Qubino Wave 1

£37.29

A Z-Wave relay with a voltage-free dry contact output rated up to 16A, for controlling locks, gates, garage doors, irrigation, LED strips and sockets from anywhere. Built on the latest Z-Wave 800 series, it draws just 0.3W and uses Security 2 authentication, requiring a certified Z-Wave gateway.

  • Dry contact output handles loads up to 16A
  • Latest Z-Wave 800 series, only 0.3W power draw
  • Security 2 (S2) authenticated for strongest available encryption
  • Automatic SmartStart setup for quick, easy device pairing
SKU: 3800235269039 Category: Brand:

Buy the Shelly Qubino Wave 1 online in the UK from ShellyUK — genuine Shelly stock with fast UK delivery.

Control a wide range of devices and office equipment, such as electrical locks, gates, garage doors, irrigation systems, LED strips, lights, and sockets, from anywhere. The output contact is voltage-free (dry contact), allowing you to connect various power supply loads of up to 16A to the device.

  • Dry contacts
  • Extremely low power consumption: 0.3W
  • Latest technology: Z-Wave 800 Series
  • Z-Wave frequency band: 868.4 MHz (CEPT countries)
  • Automatic set-up with SmartStart
  • Security 2 Authenticated for the highest level of security
  • Supports over-the-air firmware updates (OTA)
  • Works with Z-Wave certified gateways and over 4,000 Z-Wave devices

*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.

Dry contact output handles loads up to 16A

Latest Z-Wave 800 series, only 0.3W power draw

Shelly Qubino Wave 1

Security 2 (S2) authenticated for strongest available encryption

Automatic SmartStart setup for quick, easy device pairing

Where you'd use it

Garage door and gate automation

Wire the voltage-free dry contact into an existing gate or garage door motor's control input to add Z-Wave open/close automation without replacing the motor itself.

Irrigation scheduling

Connect to an irrigation system's control circuit to run watering schedules and remote on/off from a Z-Wave hub.

Electric lock scenes

Use the dry contact output to trigger an electric door lock as part of a wider Z-Wave arrival or departure scene.

Specification

Connectivity

CPU Z-Wave™ S800
Z-Wave™ repeater
Yes
Z-Wave™ frequency bands
868,4 MHz; 865,2 MHz; 869,0 MHz; 921,4 MHz; 908,4 MHz; 916 MHz; 919,8 MHz; 922,5 MHz; 919,7-921,7-923,7 MHz; 868,1 MHz; 920,9 MHz
Maximum radio frequency power transmitted in frequency band(s) < 25mW
Operational range (depending on local construction) Up to
40m indoors (131 ft.)

Protection & Safety

Overheating protection
Yes
Overload protection
No

Physical & Build

(H x W x L)
42 x 37 x 16 ±0.5 mm

Environmental

Humidity
30% to 70% RH

Power & Electrical

Power supply
AC 110-240V 50/60Hz
Power supply
DC • 24-48V • 12V ±10%
Max switching voltage
AC 240V
Max switching voltage
DC 30V
Power consumption < 0.3W
Dry contacts
Yes

Smart Features

Power measurement
No

Other

Max switching current
AC 16A
Max switching current
DC 10A
Ambient temperature
-20°C to 40°C / -5°F to 105°F

Reviews

There are no reviews yet.

Be the first to review “Shelly Qubino Wave 1”

Your email address will not be published. Required fields are marked *